View Single Post
Old 01-27-2013, 08:53 PM
culvercityclassic's Avatar
culvercityclassic culvercityclassic is offline
Motorized Bicycle Elite Member
Join Date: Sep 2009
Location: Culver City, Ca
Posts: 2,902
Default Little Red For DMB

I am starting this post for a good member and a great friend. Gave this frame to DMB and it has been sitting at my house for a bit. It was setup for a CVT and now converted to a jackshaft system since it will be raced. The motor is a HF 212 with a bunch of work from our friend Isky. The motor plate had to be modified to fit in the new configuration. Parts were on order and the wheels took for ever to get built.

Today was a big day since we had a lot of the items needed to start assembly. The forks took some machining to fit ( thanks Andy for the tips and support)

The wheels aree a one off build with 10 gauge spokes, polished aluminum double wall 24 inch, motorcycle front hub with disk and a massive caliper. The back hub is a moped type.

We got the motor mounted and the modified jackshaft was installed and lined up with the back wheel. We have a few more things and this bike should be done before the next race. I know one thing for sure this bike will be fast.
Reply With Quote