Thread: help
View Single Post
Old 01-11-2013, 08:07 PM
Greg58's Avatar
Greg58 Greg58 is offline
Motorized Bicycle Elite Member
Join Date: May 2011
Location: Newnan,Georgia U.S.A.
Posts: 2,620
Default Re: help

When you say you replaced the gaskets on the head,if that's all you did check the torque on the nuts to make sure you don't have a leak. If you replaced the cylinder base gasket check for leaks there, if it is drawing air at the base it is not drawing gas from the carb.
Your results may not be the same,Greg
Reply With Quote