Re: kill switch
I hooked my kill switch up blue to yellow and black to black. Not long after, the magneto went bad. I cut the wires for the stock kill switch out completely and now use an on/off switch wired in line with the blue wires between magneto and cdi.
Works great and also serves as theft prevention. If the switch is in the off position the motor cannot be started.
"I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it." - Thomas Jefferson
Last edited by NunyaBidness; 11-17-2008 at 12:10 AM.
Reason: I can tpye but not speel