Originally Posted by 1_2Mini
Hmmm. I did not see a little bump, but I do know the slit in the carb slide is facing towards the air inlet.
Another interesting thing is when I took apart the carb for first time the throttle cable pulled out the carb slide so hard that it got jammed at inlet. I had to force it back down, but is it supposed to block off the inlet completely? Because mine only goes about 3/4 down at 0 throttle. I'm worried that maybe it is getting stuck at full throttle.
The slit in the slide should line up with the bump in the wall saddletramp is talking about.
If you crammed it in there sideways, the little bump has probably tried to make a new slit in the slide.