Re: New Guy From Cincinnati
Welcome, nice and clean build. Here's what can suggest to help. When installing you rear sprocket grease up the bearings, after centering and starting the 9bolts&nuts number them opposite of each other. You'll have a torque pattern. Use a cordless drill&driver,10mm socket. Turn the clutch Down to #1 and run the torque pattern . Then bring the clutch up to #3 and do it again , and again until you feel your there. This is the fastest and most accurate way. However it to do this first, so you can put the wheel on the bike and check it for trueness by turning the upside-down and spin the wheel. I pray it run well . I bought first from him and it locked up 45 mins in. Good luck.
"RIDE IT LIKE YOU STOLE IT"