Thread: Clutch help
View Single Post
Old 04-30-2012, 01:06 PM
fx-2's Avatar
fx-2 fx-2 is offline
Motorized Bicycle Elite Member
Join Date: Oct 2011
Location: Tucson Arizona
Posts: 125
Default Re: Clutch help

So you have the complete picture . This motor was disassembled new bearing new gaskets an seals . The only work on the clutch was the bucking bar was polished on both ends and a small radius put on cam end I mean very small 1/16 R maybe . The cam surface was polished . Ever thing was cleaned with solvent then final cleaning with brake cleaner on assembly That's all . And red grease on the bevel gears not a lot . I check the other thread not much help . Thanks for all the help . Dan

Last edited by fx-2; 04-30-2012 at 02:59 PM.
Reply With Quote