Re: what did you do to your motor bike today?
Hey Skaard, had the same problem on my BB7. I tried going to a round rotor, but the diameter is the same as the high points on your rotor, so it didn't help. The best fix is to use another small spacer in the top frame of the caliper to move it a mm or so higher (away from the rotor). You probably know already that Avid sells these or you can simply use metric washers and stack as needed. Another tip, if you have a standard sized rotor you can get an adapter that extends the caliper mount either 20mm or 40mm to allow the use of a 203mm rotor which really adds stopping power.