Originally Posted by 2door
WD works on most stuff. If it doesn't, 3-M makes a product called 'Adhesive Remover' available at most hardware stores. It will take the goo off and won't harm most paints.
As I've hadta pull off a bunch of stickers six feet long by two feet tall & more like a coupla fifteen footers (b'danged boats), I hafta agree - it's really good stuff
3M General Purpose Adhesive Cleaner 08987, Aerosol
3M General Purpose Adhesive Cleaner 08984, Quart
Some tips tho - like with any solvent, test it on an area you don't care about so much jus' to be sure it won't mess up yer paint. While the spray can is handy, I really prefer the non-aerosol for a coupla reasons... you get a LOT more for your money & for the stubborn sticky you can saturate a (terrycloth) rag, lay it over the gooey and let it soak for a coupla minutes, then it outa wipe right off (you'll need lots of clean rags or you'll smear it around). You'll want to do this in the cool shade as this stuff evaporates quickly
& defo do it in a well ventilated area as it's very much not good for ya