Re: fixe at walmart
putting the pit bike body work on is an easy job and is real comppfy to ride. i used 2 half inch dia. pieces of tubing about an inch long, welded 3/8's nuts to them and then welded them to the top tube of the frame. this holds the gas tank on and every thing else bolts to it. under the seat i used a 2.5 in. wide piece of 1/8th steel plate i got from thc. drilled 4 holes in it and the plastic bottom of the seat, used drywall screw anchors in the seat to bolt the steel plate too. bolted it all to the bike then welded the plate under the seat to the bikes seat post. it's real strudy and can still be unbolted if needed.