View Single Post
Old 01-21-2012, 05:02 PM
Al.Fisherman's Avatar
Al.Fisherman Al.Fisherman is offline
Motorized Bicycle Elite Member
Join Date: Sep 2009
Location: Calera, Alabama
Posts: 1,966
Default Re: Help Bevel gear is fixing to come off

First off, if you want to remove the smaller clutch gear (of the two), remove the spark plug, stuff some cord (about 1') into the spark plug hole, leaving enough to retrieve. When you turn the gear (screw) the piston will contact the cord and stop piston movement. After removing the screw, and you might have to use a hammer hand impact. Then remove the gear using the proper gear puller if you have one. Although you can drive it back on as mentioned above. Make sure the woodruff key is in place and not sheared. Replacement as needed.
Looking for HT's parts?
HT pre instillation tips.
Engine running problems?
HT breakdown Photos

Ron ><)))))*> Calera, Alabama

Last edited by Al.Fisherman; 01-21-2012 at 05:06 PM.
Reply With Quote