View Single Post
Old 11-05-2011, 05:54 PM
murphyzpug murphyzpug is offline
Motorized Bicycle Newbie
Join Date: Oct 2011
Location: Newcastle, Australia
Posts: 7
Default Re: Hello, trying to get there, Newcastle NSW

Ok i've had the surging since new, which is why i fitted a o-ring at the end of the intake, i also put another small o-ring even on the accelerator cable, and i can't seem to find any air leaks, the clutch is perfect and grips very well. i've even swapped over the ignition lead to something a little higher quality plus went to a NGK B5HS and leaned out the motor by putting the circlip on the highest setting (only have 4 notches, was already 3 up). but otherwise than this little problem i'm throughly enjoying myself. i am trained as a marine engineer so i am familular with small two strokes (outboards) although i mainly work on larger diesels, but these little chinese things have me shaking my are so simple and roughly made but awesome fun and the bike has already paid for itself in fuel savings. i will post some pictures up soon.
Reply With Quote