View Single Post
Old 10-29-2011, 12:31 PM
richirich's Avatar
richirich richirich is offline
Motorized Bicycle Elite Member
Join Date: Aug 2011
Location: Port Angeles, Washington
Posts: 297
Default Re: How do I get my mounting studs out?

thread two nuts onto the stud, then tighten the two nuts together, the lower one counter clockwise and the top one clockwise till they are tight together. then with the wrench on the lower nut only turn counterclockwise to loosen.
Or you can crank down with a pair of vice grip pliers and turn counterclockwise to loosen if you are not going to use the studs again.
Hope that helps..
Reply With Quote