Originally Posted by AndrewPwrP2P
I did not have a gear puller :P The sprocket was already on the tranny. heh But buying a full on new tranny kit is 228 dollars as compared to the 11tooth by itself is only 10 xD Would they have them at Lowes or home depot possibly? :P
You will have to place a screw driver in one of the holes on the T Pulley.Or you can get a rag and put it between your hand and the T pulley and just hold it...watch out it is very sharp on the edges.Once you get your new 11 tooth you should get it welded up.Then it will last....other wise it will fail again.