I second all you said here GH, I use anti seize on the spark plug and then I use Blue Loctite on the mounting bolts for engine to frame and the intake bolts, nothing else really seems to need it in my experience.....
Originally Posted by Goat Herder
I don't use any anti-seize stuff ''at all''on any of my motors except perhaps just on the spark plug threads. . I used this stuff for tune ups in automotive on spark plug threads. Good stuff a little goes a long ways. It can be no time at all and ya got the stuff all over you!~ lollol
For a replacement ''usually just the motor mount bolts'' But I am a big six foot guy. Somebody will post that is much shorter and weighs a 100 pounds with a completely different story lol
. I typically use ''non stainless'' grade 5 bolts or the black grade 8 cap bolts with blue Loctite. Note loctite is not necessary on every fastener. My bike will not be in the lake or an ocean.