View Single Post
Old 06-23-2011, 11:09 AM
MotorBicycleRacing's Avatar
MotorBicycleRacing MotorBicycleRacing is offline
Motorized Bicycle Elite Member
Join Date: Jul 2010
Location: SoCal, Orange County.
Posts: 5,356
Default Re: Parts that should be replaced before installing the kit

Originally Posted by Mozenrath View Post
I thought it would be a good idea to make a thread about components that should be replaced before installing the kit, since as we know the parts that come on the kits and bikes usually aren't of the best quality. This includes both parts from the kit and parts on the bike.
Replacing the rag joint with a sprocket hub adapter is the first upgrade I
would recommend.

Fuel lines are junk and a hazard as they degrade fast and could fail
dumping gas on a hot motor with disastrous results.

Replace studs, nuts and bolts especially the ones on the chain idler if
you are using it. Sick Bike Parts makes it easy as they have the parts
so you don't have to waste time running around finding them.

Replace the junk Chinese spark plug. I have seen the porcelain crack on them
which could ruin your motor.

Replace the intake gasket, make your own and match it to the port.

Last edited by MotorBicycleRacing; 06-23-2011 at 11:35 AM.
Reply With Quote