Re: OP Roller...need some help!
My "rubbers" were so uneven that I cut them both to make 1 of uniform thickness. I took the sprocket to a machine shop and had them cut the center hole to fit the dustcap. I used the cut rubbers inside the spokes with the 3 hole plates and I used the 5/4 holes plates to space the sprocket off the spokes.
I wouldn't do this if I didn't first get a steel wheel with 12g steel spokes though.
That's why the back wheel looks so odd. Not to mention the 26x2 tire so the chain didn't hit the tire.
The only thing in my garage with 4 wheels is the lawnmower