View Single Post
Old 06-18-2011, 10:13 PM
2door's Avatar
2door 2door is offline
Super Moderator
Join Date: Sep 2008
Location: Littleton, Colorado
Posts: 16,224
Default Re: Non-dished rear drive sprocket?

Originally Posted by flatblack View Post
Got mine sorted. Bent the arm, trimmed the dust cap and went a 1/4 turn at a time on each bolt on the rag joint. Only about 1mm out on side to side movement and .5mm on vertical movement of the drive gear. Then I went I did exactly what I didn't want to do...made the dang chain too short! Didn't even think about the master link only fitting the roller part of the chain...guess that's what I get for being a "car guy"
If there's an Ace Hardware or a Grainger near you they both carry #41 chain, master and half links. #41 is a better option than the kit supplied #415 anyway so you'll be ahead of the game.
Good luck, ride safe.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"
Reply With Quote