View Single Post
Old 05-03-2011, 04:28 PM
Greg58's Avatar
Greg58 Greg58 is offline
Motorized Bicycle Elite Member
Join Date: May 2011
Location: Newnan,Georgia U.S.A.
Posts: 2,620
Default Re: What carb are the kits shipping with these days?

Originally Posted by greggasbike View Post
greg58 , you didn't have the airleak problem ? I have 2 Oct 2010 kits w/ the cns carbs , both carbs did not fit the intake , that was the biggest problem. I had to use high temp silicone to stop all the airleaks, then it ran okay. I also adjust the main to the second to bottom clip , just on one , really did not notice any diff. The other prob I had with the CNS carb was that the linkage did not secure into its sleeve at the carb and throttle control , so I used electrical tape to solve that ... now it runs perfect , but those were two easily fixable probs that the factory overlooked....
Too bad they don't test their product , if it was USA built and we actually answered our customers concerns , probs would be solved.... lol
Silicone was the first thing i did. remember i had five of these, one was still in my shop so i tried that carb it runs good. I have since built another bike with that kit both are running good but the one i repaired run alot better.
Reply With Quote