Re: rag joint assembly?
Listen to Venice. He knows what he's saying. Suspend the rear wheel by some method and spin it. If the sprocket doesn't spin true you're going to have problems with the chain.
Your assembly is correct. Sprocket-rubber-spokes-rubber-metal plates. Preferably the teeth on the sprocket should be to the outside if you have dished sprocket. This will give you maximum chain to frame and rear tire clearance. Good luck.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"
Last edited by 2door; 01-13-2011 at 07:50 PM.