Originally Posted by yodar
Installed THIRD throttle cable, and all i got is full speed ahead -- no throttle adjustment
WHAT DID I DO WRONG?
ALLL THROTTLE CABLES BREAK FROM FLEXURE RIGHT ABOVE THE LEAD BALL
You need to ever so insanely carefuly cut about 3/8" of sheath off the cable from around the inner. Near damn impossable to do without nicking it. Dremel cutoff wheel can do it.... Maybe a bike shop can do it... There are posts on her about remaking the ends, So you could cut the cable, Remove it, cut the sheath, then put a new end on (need to cut sheath more to leave enough inner cable to cast a new end on, But stock throttle cables are usally too long anyway)
On the plus side, if you make it way to long as I did, your throttle grip is just loose for a little bit of the twist, You won't lose WOT (Wide open Throttle).
What end does your throttle brake at? Maybe you should make a new thread.