Re: Throttle problem
Hi,it sounds to me like your throttle handle is by passing the stop on the throttle housing.if you can turn your handle forwards and it keeps going past the idle position.Here's how I fix that problem.
The first pic is the location for drilling.
the second is a 3/32nd drill bit.Drill straight down 3/4"
The third is a 3/4"long 3/32nd tension pin.
4th is tension pin installed.
5th is throttle handle located as it rides in throttle housing.Good luck,Kip
Last edited by kipharley; 10-04-2010 at 04:43 AM.