View Single Post
Old 07-17-2008, 04:43 PM
Venice Motor Bikes's Avatar
Venice Motor Bikes Venice Motor Bikes is online now
Custom Builder / Dealer/Los Angeles
Join Date: Mar 2008
Location: Los Angeles, CA.
Posts: 6,017
Default Re: how to redrill main jet?

find a hardware store that sells jewlers drill bits, take your jet in with you & find the # bit that fits your jet. (probably a #70 bit) Then use the next size bigger to drill the jet. DON'T DRILL IT TOO BIG!!!
After you drill it one size bigger & put it back in the carb and take the bike for a ride.
If it seems to run a little better but not yet perfect then drill it again with the next size up until it runs good. AGAIN!!! DON'T DRILL IT TOO BIG!!!
If it runs worse, then you know you need to make the hole smaller.
For motorized bicycle sales, service & engine kits in Los Angeles, please visit us at-

Follow VMB on facebook>>>

Follow VMB on Instagram>>>

Last edited by Venice Motor Bikes; 07-17-2008 at 04:50 PM.
Reply With Quote