Re: Sprocket Replacement Tips/Links???
Nogig. I actually got it figured out, at least managed to get the sprocket off without busting anything.
I was a bit challenged by trying to turn the center nut without the engine turning over and was fearful of breaking gear teath on the clutch side if I got too aggressive thrying to block the clutch.
Then I remembered a trick from a long time ago; pull the spark plug, rotate the piston down a bit and fill the cylinder with a length of good non-fraying rope, then as you turn the sprocket nut that of course turns everything else once the piston comes up against the rope in the cylinder you've got it licked.
Ron in Westy