View Single Post
Old 06-20-2010, 11:06 PM
2door's Avatar
2door 2door is offline
Super Moderator
Join Date: Sep 2008
Location: Littleton, Colorado
Posts: 16,222
Default Re: changing motor mount angle

Originally Posted by curtisfox View Post
I think you are under estamating JB weld? It says that it can be machined,drilled and taped. I know its some great stuff. There used to be a product called Liqued Steel it dried to look like aluminum. That was some awesome stuff
JB weld might have its place but this isn't one of them. It is a poor man's Devcon. It will not stand up to the rigors of vibration and stress and that has been proven time and again. Yes you can drill and tap it but you can do that with Plastic Wood. That doesn't mean it will stand up to the vibrations and stress from a 2 cycle engine. But like everything else in this hobby...if it works for you, then go for it. I just don't want it around me or my bikes. I prefer something that I know will last. JB Weld isn't one of them. The product you mentioned, 'Liquid Steel' is a Devcon product, still made and still available. And yes, it is a good product. They also make liquid titanium and is good for high heat applications.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"

Last edited by 2door; 06-20-2010 at 11:08 PM.
Reply With Quote