View Single Post
Old 05-17-2010, 09:24 PM's Avatar is offline
Motorized Bicycle Elite Member
Join Date: Sep 2009
Location: San Diego
Posts: 117
Default Re: First Cruiser build - Open to comments

A little tip for the wiring... If you use zip ties, don’t tighten too much ... I prefer running the clutch and the throttle cables through the nice gaps between the gas tank mounting bolts and the frame.... holds it securely, and puts them in a nice approach angle to where they go on the motor.... also not tight, so they function.....

... also might want to tighten up your chain tensioner wheel (chain “looks” loose)... i like to drill a small 3/16” hole through the tensioner and the frame to keep it from moving...

LOOKS GOOD.... hope this stuff helped
Itís never too early to beef up your obituary...
Reply With Quote