View Single Post
Old 04-25-2010, 08:15 PM
corgi1's Avatar
corgi1 corgi1 is offline
Motorized Bicycle Elite Member
Join Date: Aug 2009
Location: KCMO
Posts: 2,282
Default Re: Bucking bar to camshaft problem.

would a piece of drill rod work the cam end would need to be polished and lubed so as not to wear the cam and the ball end flat ,,,wait a min.,,,there is no play in the clutch arm the rod is in constant tention and turning against the cam on the arm while going down the streetand wearing down ,(or the return spring is missing?)when the clutch is squeezed and the bike is setting still the rod doesnt turn,no wear on the rod
Reply With Quote