View Single Post
Old 04-14-2010, 06:07 PM
VIP VIP is offline
Motorized Bicycle Newbie
Join Date: Mar 2010
Location: maineville ohio
Posts: 17
Default Re: Got my Cranbrook about half done.

Another question about the clutch hardware.

The clutch handle adjuster is too soft and the cable end digs into it and then you can't adjust it.

On the motor end the cam housing that has the cam in it that operates the clutch is pretty bad also.

At least on mine the cam flops around in there. Like that when new..

The hole that the cam goes into is about 1/16th of an inch too big. I have plenty of grease on it but If I make some bushings for it I feel it will operate a lot better.

Are they all like that or is this just a bad one??

On the clutch handle end, I can replace that with the Motorcycle piece that has a harder adjuster mechanism in it but it won't have the stop to hold it open.

Speed Partz, Clutch Lever for mini-sprints, modified midgets, micro midgets, mini sprints, side winder
Reply With Quote