Re: JB Wield
I wasn't joking, I have snapped off two front motor mount bolts right down to the engine, the first I tried to drill out, and couldn't drill on center so my easy out failed miserably. On my new motor, I recently busted another bolt, again flush with the motor. This time I took a dremmel tool and a cutting blade, and cut a small slot across the bolt. I had to cut into the motor just a bit, but you would never notice. The bolt came out with no effort using a screwdriver. I also promptly installed a front motor mount from sick bike parts, instead of continuing to use the stock mounting method. No problems thus far.