Re: Problem with electronic Speedometer
Do what Cabin Fever suggested. Keep the speedomoeter head as far from the engine ignition components as possible. That includes the clutch cable, throttle cable and kill switch wires. If possible mount the CDI on the seat tube instead of the down tube. Keep the speedometer away from the RF signals generated by the ignition. You didn't say if your speedo is wired or wireless. The wireless units are more susceptible to electrical interference than the wired type but the same advice applies. Keep as much distance as possible from the speedo and the engine. Good luck.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"