View Single Post
Old 06-19-2008, 11:46 PM
Mopedamauter79's Avatar
Mopedamauter79 Mopedamauter79 is offline
Motorized Bicycle Elite Member
Join Date: Mar 2008
Location: Ottawa
Posts: 254
Default Re: Installing a new Magnet.

I can't get it in that far at all.There is no thread at all for the nut to go on as the magnet isn't all the way in. I've pretty much given up on this by this point. To much hassle and frustration with it.

I emailed a seller of these engines about how to install that magnet and It sounded complicated for a simple thing.

"You will likely need to either use a press or to use a socket that has thick walls on it and is the same diameter as the inner area of your magnet. Use a hammer to tap it into place with having the socket between the magnet and the hammer…try not to bang on it too much or you could knock the magnetism out of the magnet.

A press would do you best though…just make sure that you have the keyway lined up properly."
Reply With Quote