View Single Post
Old 12-28-2009, 08:16 PM's Avatar is offline
Motorized Bicycle Elite Member
Join Date: Sep 2009
Location: San Diego
Posts: 117
Default Re: Finished install and bike won't move


If the clutch lever is doing nothing to the clutch arm when you squeeze it, I think your clutch cable has too much slack. I would recommend that you loosen the bolt on the clutch arm, then pull the clutch cable tight enough to make the spring (little one) between the clutch arm and engine compress and go straight, but not so tight that the clutch arm itself moves, and then tighten the bolt back. this way the cable is absolutely as tight as it can be without moving the clutch arm, and when you squeeze the clutch lever, the arm will move.

p.s. like greenflash? their beer is epic
Reply With Quote