Re: Finished install and bike won't move
I might have tightened the brake assy. too much. I didn't do any grinding in that area so I'm pretty sure the sprocket is tightened over the cap. If I grind the outside of the cap down so that the sprocket clears it, that might work? As for the clutch, I wired the attachement to the arm and when I pull, it doesn't really move. I can move it to swing out (by hand) but it won't pull in using the lever. I'm very new at this so no offense taken. Thanks!
P.S. those are the coolest bikes ever on your link!!!
Last edited by Hophead_90720; 12-28-2009 at 06:16 PM.
Reason: wanted to add a P.S. to Spunout