Re: Fat franks too wide??
You can 'dish' the wheel over just a little by loosening all the spokes on the pedal side 1/2 turn & tightening the spokes on the other side 1/2 turn!
Start at the valve stem & work your way around the wheel one side at a time.
You can also gain a little by adding a large washer in between the crank sprocket & the bearing race that holds it onto the cranks.
Don't add too much or the pedal might hit the engine on the other side!
Last edited by Venice Motor Bikes; 12-10-2009 at 05:04 PM.