View Single Post
Old 10-29-2009, 12:05 AM
Egor's Avatar
Egor Egor is offline
Motorized Bicycle Elite Member
Join Date: Jan 2008
Location: Hurricane Utah
Posts: 714
Default Re: Another Build from an abandon in the park bike

Well I got the engine apart that was leaking through the crankcase. The gasket was missplaced and let the vacuum go, it was sucking air at the top under the carb. I will just seal the engine together with Permitex. I have the hardening type. I was surprised to find so much crud in this engine, there were cutting's from the manufacture and dirt. I am going to take one of the side wheels off the crank and see what it looks like inside. Should have the balancing cut outs. This is the engine I want to put in the Stretch Cruiser, it was the one I was trying out the different carbs on. Have fun, Dave

In the pic you can see the gasket holes out of alignment. and the gasket not covering the crankcase just in front.
Attached Images
File Type: jpg Gasket trouble.jpg (673.6 KB, 35 views)
File Type: jpg All Parts.jpg (604.8 KB, 30 views)
Its just a job. (Link) My shop is in the lower R/H corner.
Reply With Quote