View Single Post
Old 10-20-2009, 05:01 PM
Norman's Avatar
Norman Norman is offline
LORD VADER Moderator
Join Date: Jan 2008
Location: pampa texas
Posts: 2,606
Default Re: Apple juice tank

I must say I like the juice can fuel tank. If you want to thread very thin aluminum I've found that harbor freight sells an aluminum solder( this solder is probably sold other places) that you can use with a propane torch. you can build up the area you want to tap with this solder shape it with a dremel tool and drill then tap the hole. You can even solder beer cans with this solder. Now there would be a fuel tank bud cans soldered together or those small kegs.
For non vented fuel caps almost any tin can that is threaded would work on a tin can set up you can get inventive for the vent system.

Last edited by Norman; 10-20-2009 at 05:09 PM.
Reply With Quote