Re: 87cc Maytag 2 Cylinder 2 Stroke Engine
here is more pictures of it mostly stripped down to the size it will be installed as, it is maybe only a couple pounds heavier than a chinese motor. From cyl head to cyl head it is 11.25" & the total length of the crankshaft is 12" but could easily be shortened to 9.75" when the starter end is removed... the height of the crankcase is 4.75", not counting the fuel intake which will be modified or removed.
Look at the tiny exhaust ports on this thing maybe some port work can get 1 hp out of it
SOLD..50cc Morini S6-T 5.8hp,
44 tooth sprocket, Early 1990's Diamondback Frame, 26" WTB FX28 Wheels w/ Shimano XT Hubs,
Dellorto PHBG Race Edition 19mm Carburetor, 4 Valve Reed Intake (combined adds ~2hp),
Homemade Expansion Chamber, Homemade Steel Pack Muffler, Homemade 1.6 gallon Rear Gas Tanks
TOP SPEED: 54.0 MPH (not gps tested yet)
Last edited by europorsche914; 10-08-2009 at 06:50 PM.