Stripped 6mm Threads

[vicsvw]

Vic's Tip *** If you have any 6mm threads that are stripped. Install heli-coils. But if you don't have the special tap kit here is the next best thing. Just tap the striped out threads to 1/4-20 american. The tap drill for the 1/4-20 is a #7 drill. But when the 6mm pulls the threads out it's just the corect size for taping the 1/4-20. No need to drill out the old threads.

[andrewg225]

how do you mount a sprocket to a chopper wheel? i want to put mine togeather

[andrewg225]

do you have to drill though the wheel hub? or is there anouther way to do it

[donuts31]

timesert inserts is what I prefer used to fix 3 stripped threads on one of my engines.

[wildemere]

By 1/4-20 American do you mean UNC or BSW or just whitworth.

I have not heard of that measurement here in Australia.

[Bikeguy Joe]

1/4-20 is 1/4 inch with 20 threads per inch.
SAE/American.

[HoughMade]

Originally Posted by donuts31

timesert inserts is what I prefer used to fix 3 stripped threads on one of my engines.

I watched the video from Timesert and have been over the website- If I were using a Chinese 2 stroke, I would seriously consider installing Timeserts from the beginning, at least at the engine mounts.

[broHSI]

Originally Posted by HoughMade

I watched the video from Timesert and have been over the website- If I were using a Chinese 2 stroke, I would seriously consider installing Timeserts from the beginning, at least at the engine mounts.

Probably put timeserts on the exhaust port too as they fail fairly often as well because of the exhaust hanging off the studs.

Unfortuneately the Timesert kit is about $50 for the 6 mm size

[HoughMade]

I've often been accused of taking an inexpensive hobby and making it an expensive one. I'd have to plead guilty to that.

[donuts31]

One of my bikes now has 3 timesert inserts. The latest one is on the head-intake stud stripped out on me while repacing gasket.