work stand for your motorized bicycle

**CRUISER** · #1 (**permalink**) 03-17-2008, 04:31 PM

this is a park bicycle work stand. it is awesome their isn't a part of the bicycle you cannot get to with ease and you don't have to stay bent over to work on it. it has jaws that clamp on any post on the bike including the seat post. then you can rotate your bike like a propeller to the position that is best for you. here is a picture of both sides to give a good idea what a great tool this is. just click on the thumbnails and pictures should be full size.

**Ilikeabikea** · #2 (**permalink**) 03-17-2008, 05:04 PM

Wow, thats a good idea. I bet we can make one of those.................

**CRUISER** · #3 (**permalink**) 03-17-2008, 05:41 PM

yes with ease. you can get the clamp only from park tools and alot of bike shops but with you and normans talents i am sure you could make one. it is unbelievably stable and it sure is nice to be able to work on both sides of the bike without moving everything around to do it. let me know if you want some close up pictures of the clamp. takes a second to put the bike on it and to take it off

**CRUISER** · #4 (**permalink**) 04-04-2008, 09:51 PM

here you can see the beauty of these stands.. i needed to work on my front motor mount today and i just put the bike on the stand and set it so the front tire was pointing up in the air took a seat and relaxed and did what i needed to do.

**Bikeguy Joe** · #5 (**permalink**) 04-05-2008, 06:05 AM

That's what I need, right now I have two ropes hanging from bike hooks screwed into the shop ceiling.

Very adjustable, not so stable when you have to lean into a bolt ect.

**CRUISER** · #6 (**permalink**) 04-05-2008, 06:50 AM

the stand in the picture is real stable. i do everything on it. i don't like bending over for long periods of time for it kills this old mans back

Pablo · #7 (**permalink**) 04-05-2008, 07:56 AM

How much does that humper cost?

**CRUISER** · #8 (**permalink**) 04-05-2008, 08:39 AM

it was around a hundred but worth every penny. you can work on eather side of the motorized bicycle, angle it, tilt it. basically you can put it in almost any position you want and it is nice and secure

**Bikeguy Joe** · #9 (**permalink**) 04-05-2008, 06:07 PM

Did you get it from ebay or online? I thought those things were closer to three....at least the one at the bike shop was.

**Ilikeabikea** · #10 (**permalink**) 04-07-2008, 05:09 PM

Here's what my work stand looks like. It's a bit more primitive than Cruisers...........