Worksman in the works

I recently purchased a mush used Worksman newsboy cruiser from eBay for $108.00 including shipping. I knew it was rough, but was hoping that the rear wheel at least would be usable. This old boy had been cannibalized pretty thoroughly. The wheels are not worksman, but some kind of cheap and much rusted balloon tires of more recent vintage. The spokes alone are a dead giveaway, being much too small a gauge. I already knew the handlebar and goose-neck were rusty, the seat and seat post long gone, without fenders or chain guard. I knew all this, yet seeing it in living color (red and rust) I momentarily questioned the wisdom of my purchase. Still, what I wanted was the strong frame for the foundation of a cruiser build. The frame is very good, as is the front fork. The welds look really good to my eye. It is the starting point and will get built up on a budget from there. Don't get your hopes up that this is going to be an astonishing build from a master builder. I am a craftsman of sorts in other things... woodworking, stained glass, leather work, but a tinkerer only when it comes to motorbicycles. With that disclaimer out of the way, I do hope to end up with a classy ride on my limited budget.
Silverbear

Attached Thumbnails

     

__________________
Someday when I grow up I will probably lose interest in toys with wheels, but until then...

You GOTTA save that bell though!

To get some new perspective I dug out my parts from a 1940 Elgin I had at one time planned to restore until the frame disappeared... a mystery still unsolved. When I bought this worksman I had in mind using the Elgin parts to complete it. You can tell from the photos below that nothing is attached, but is just sitting there roughly balanced. You can at least get an idea of what I am thinking. I'm unsure about the fender skirts on this bike, but will proceed as if there are going to be part of the final version. I am picturing a deep blue, a cobalt blue, a blue so inviting that you want to dive in and swim around. I may not be able to get a great paint job, but I'll do my best and it will look good. I may go with a second color for accent on the fender tips where it had been white or cream colored at one time. I'll prbably go with black. Not much contrast, I know, but I want this bike to look substantial and all business. About the only chrome on this build will be the Kawasaki front fender light and the headlight. The pedal crank will need to be changed since I want a pull start 80cc slant head for the engine. It will get new wheels, heavy duty rims with 12 gauge spokes.
I sat my old Dax 80 in the frame to see how it fit and it is going to be a challenge getting it tucked in there. The intake may need to be altered and the slant head facing forward will be a help since the spark plug would otherwise be running into the lower cross bar. The Elgin seat post is a smaller diameter, so that needs some pondering. I'm open to suggestions other than expensive ones. And I have a pretty thick skin, so if you don't think something works it is fine to say so. I may like your idea better than my own. This is going to be pretty much a winter project, so there's plenty of time to think things through.
Silverbear

Attached Thumbnails

       

__________________
Someday when I grow up I will probably lose interest in toys with wheels, but until then...

Yes, well, I would be willing to sell that very fine bell if you're interested. I'm sure it would look great on your bike.
Silverbear

__________________
Someday when I grow up I will probably lose interest in toys with wheels, but until then...

I think the fender skirts would look awesome painted the blue you have in mind but put a piece of sheetmetal behind them and paint that gloss black. Would give them more if a fender skirt look instead of a skirt protector look.

A few hours or sanding & a couple of cans of spray bomb... That's gonna look real nice!
(engine paint works well against gas!!)

__________________
For engine kits & bike service in Los Angeles, visit us at- www.VeniceMotorBikes.com

I thought the fender skirts were actually skirt guards from a ladies bike. That is were I have seen them before. I never thought about them on a mens bike. With the right paint scheme it could look pretty cool though.

Jim

__________________
EZ Motorbike Distributor / Dealer Guthriesville Pa

Hey Jim,
No, I've never seen fender skirts on a men's bike either. But I have these from that old 1940 Elgin and like them. The elgin skirts were about the coolest in my opinion. Kind of an art deco look suggesting motion. I guess ever since I started riding and putting motors on step through Americans I quit worrying about mens bikes vs women's bikes, my masculinity or any of that. I don't think about or care what anybody else thinks anyway. It hasn't stopped a lot of people from admiring my Americans, including the Harley boys. Most people don't even know what the fender skirts were for as they are even before my time... yes, back when girls actually wore dresses and skirts they sometimes got caught in the spokes, so the deluxe bikes had skirt fenders. I tend to use what I like and have especially if I like the way it looks. I'm still undecided for this Worksman. I think I'll prep them along with the bike and fenders and chain guard and reserve judgment until I have everything in primer and can get a better idea of how it all works together. They might not look right on this bike. What do you think?
Silverbear

__________________
Someday when I grow up I will probably lose interest in toys with wheels, but until then...

I did a little research on them a few weeks ago and I guess they were on some men's bikes too to keep your overcoat from getting in the spokes.

Makes sense. You have saved the day, sir. My manliness is not in question. It is all what you call something. Ladies bikes are actually "step through" bikes and skirt fenders are actually coat guards.. Now that has a manly sound to it, don't you think? "Coat guard".
I was riding in the truck with my youngest son today (he's about 30) and we were talking about how much we loved riding as kids. I told him when I was young I never saw a child sized bicycle. You went from tricycles to adult sized bikes. My sister helped me learn on a full sized cruiser type single speed. I was six and the men's bike had chunks of 2x4 taped to the pedals so that if I slid down on one side and then the other I could reach the pedals, sort of. She helped me balance up there and then gave a push. A number of crashes later I learned. My son and I were speculating why it is that boy's bikes have that crossbar which has resulted in a number of boys being sopranos for life. The girls don't have that problem with damaging the family jewels, so they are the ones who should have the cross bar and the poor boys should have the step through. Makes sense to me. My son felt that the first designer was probably a woman trying to get even. I think there may be a good chance of that.
Silverbear

__________________
Someday when I grow up I will probably lose interest in toys with wheels, but until then...