Motorized Bicycle Engine Kit Forum
Register FAQ Members List Calendar Mark Forums Read

Sponsors



Go Back   Motorized Bicycle Engine Kit Forum > Bicycle Motor > High Performance Bicycle Engine Tips

Nitous Oxide Injection


Discussion at Motorized Bicycle Engine Kit Forum in the High Performance Bicycle Engine Tips forum. I have not even got bike up and running yet but I have an idea that may work. You may ...
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-24-2008, 02:01 PM
Motorized Bicycle Apprentice
 
Join Date: Mar 2008
Posts: 4
Thumbs down Nitous Oxide Injection

I have not even got bike up and running yet but I have an idea that may work. You may have seen the tire inflating kits that use a small CO2 cyliners that are the same for shooting BB guns. I use one with a small tip to blow out an unfired charge in black powder guns when we have a misfire. Well you can buy nitous oxide cyliners for whipped creme makers that are the same size. This little rig is very small and has a thumb operated lever. What if you attach one to your handle bars with a air line going to your air cleaner on your bike motor. Push the lever and have up to 30 seconds of nitous injection. The inflater lever is spring loaded so it is on or off until the gas is gone. The end unscrews to put a new cyliner in and only takes seconds to do and the cyliners are cheap, less than 5 buck for a box of 20 or so. This may blow the little motors up I don't know if they can handle it. It may be the answer for a few of the speed freaks out there trying to set the land speed records. Its just an idea that cost less than 25 bucks. Thanks
Reply With Quote
  #2 (permalink)  
Old 03-24-2008, 03:10 PM
RedB66's Avatar
Moderator
 
Join Date: Dec 2007
Location: Gainesville, FL
Posts: 194
Default Re: Nitous Oxide Injection

I have a Nitrous set-up on my stretch. I installed it more for looks than function. I does work and adds some boost to the motor. I haven't shot all of it at once....just in spurts. As I'm riding I can reach down and press the button and instantly hear and feel the rpm's jump.
Attached Thumbnails
nitous-oxide-injection-100_0917.jpg  
__________________
Reply With Quote
  #3 (permalink)  
Old 03-24-2008, 04:30 PM
Bikeguy Joe's Avatar
Moderator
 
Join Date: Jan 2008
Location: Ohio
Posts: 1,148
Default Re: Nitous Oxide Injection

Ouchy......
__________________
ENJOYING THE RIDE!
Reply With Quote
  #4 (permalink)  
Old 03-24-2008, 04:43 PM
Andyinchville1's Avatar
Manufacturer/Dealer
 
Join Date: Dec 2007
Location: Charlottesville, VA
Posts: 127
Default Re: Nitous Oxide Injection

Sweet!....I LIKE it!
Andrew
__________________
Sprockets now available in 9 anodized colors!

http://www.myspace.com/kingssalesandservice
http://www.youtube.com/watch?v=-zyU8n41f2c
Reply With Quote
  #5 (permalink)  
Old 03-24-2008, 07:36 PM
Easy Rider's Avatar
Master Motorized Bicycle Builder
 
Join Date: Jan 2008
Location: Nor*Cal
Posts: 203
Default Re: Nitous Oxide Injection

I have a wet nitrous kit that I used on one of my karts and I took it off after blowing an expensive reed cage,3 rings, a couple of pistons and 2 cylinders. The only scary part was after you depress the button, there's a 3 second delay meaning the kart kept pulling like a freight train after you let off the button. To me that was pretty scary especially going into a turn and the sucker keeps pulling. I evenually learned to use it wisely but it was a costly experiment...now collecting dust!

Reply With Quote
  #6 (permalink)  
Old 03-24-2008, 08:19 PM
deacon's Avatar
Master Motorized Bicycle Builder
 
Join Date: Jan 2008
Location: north carolina
Posts: 1,799
Default Re: Nitous Oxide Injection

But did you ever sniff it????
__________________
visit my blog if you dare http://chinesekitmotorbike.blogspot.com/
Reply With Quote
  #7 (permalink)  
Old 03-24-2008, 08:36 PM
Ilikeabikea's Avatar
Moderator
 
Join Date: Jan 2008
Location: Pampa, Texas
Posts: 473
Default Re: Nitous Oxide Injection

You know if we all had nitrous any time we got pulled over by the police we could let out a little bit of that gas and get the police to laughing and who knows they might even want to ride the bike...................
__________________
"If you can't beat em, just wear em out till they get tired of you"..................

http://bdconner.com
Reply With Quote
  #8 (permalink)  
Old 03-24-2008, 09:11 PM
deacon's Avatar
Master Motorized Bicycle Builder
 
Join Date: Jan 2008
Location: north carolina
Posts: 1,799
Default Re: Nitous Oxide Injection

I ain't ridin double with no cop. Well there is this little blond
__________________
visit my blog if you dare http://chinesekitmotorbike.blogspot.com/
Reply With Quote
  #9 (permalink)  
Old 03-24-2008, 09:37 PM
Easy Rider's Avatar
Master Motorized Bicycle Builder
 
Join Date: Jan 2008
Location: Nor*Cal
Posts: 203
Default Re: Nitous Oxide Injection

Quote:
Originally Posted by deacon View Post
But did you ever sniff it????
No, but I've heard some good stories of friends that did!
Reply With Quote
  #10 (permalink)  
Old 03-25-2008, 12:44 PM
Motorized Bicycle Builder
 
Join Date: Mar 2008
Location: Minneapolis, MN
Posts: 23
Default Re: Nitous Oxide Injection

Here you guys go, should work for our engines.

47cc 49cc MINI POCKET BIKE BOOST BOTTLE / NOS KIT!!!! - eBay (item 230234034767 end time Mar-30-08 06:43:22 PDT)
__________________
So many potholes, So little time
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 04:17 AM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.1.0
Motorized Bicycle Engine Kit Forum vBulletin Optimizations


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19